Differences

This shows you the differences between two versions of the page.

--- debug_port [2025/05/04 18:50] – ounsatn
+++ debug_port [2025/05/04 18:54] (current) – ounsatn
@@ Line 51: / Line 51: @@
 To log into linux, as we don't have password, we are going to change it by mounting the rootfs partition and then we run passwd to change password.
-Under uboot, print current bootargs, UUID will be different so use the one you have.
-We add //"single init=/bin/sh'"// to the end of the booting args with command below :
 <code>
+# Under uboot, print current bootargs , UUID will be different so use the one you have.
 $>printenv bootargs
 $>bootargs=root=PARTUUID=1c5755ae-899e-475b-821b-636c4825550c rootwait ro console=ttyS2,115200 rfkill.default_state=0
+# We add "single init=/bin/sh'" to the end of the booting args with command below :
 $>setenv bootargs 'root=PARTUUID=1c5755ae-899e-475b-821b-636c4825550c rootwait ro console=ttyS2,115200 rfkill.default_state=0 single init=/bin/sh'
+# Print again to check everything is fine :
+$>printenv bootargs
+# Then boot
 $>boot
+#Remount rootfs / with read write rights :
 $>mount -rw -o remount /
+#Change password, type what you want
 $>passwd root
+#Reboot
 $>reboot -f
 </code>
+and Voila, you have a console access to your device.